Product-Product-Nanyang Xinte Electric Co., Ltd

Product

广泛用于城市电网改造、住宅小区、高层建筑、工矿、宾馆、商场、机场、铁路、油田、码头、高速公路以时及临性用电设施等户内外场所。

Bus bar refers to the connection copper bar or aluminum bar between the master changer in the electric cabinet and the changer in each shunt circuit in the power supply system. The surface is insulated, and its main function is functioning as wire.

Contactor

It is used in electric power, distribution and consumption occasions. In a broad sense, contactor refers to an electrical appliance that uses the current flowing through the coil to generate a magnetic field to close the contacts and control the load in industrial electricity.

Disconnecting changer

It is a kind of switching device which is mainly used for “isolating power supply, switching operation, connecting and cutting off small current circuit” and has no arc extinguishing function.

Dry-type transformer iron core

As a magnetic circuit, it converts the electric energy of the primary circuit of the transformer into magnetic energy, and then converts the magnetic energy into the electric energy of the secondary circuit and transmits it to the electrical equipment.

Dry-type transformer temperature controller

Three kinds of Pt100 platinum thermal resistors embedded in the three-phase winding of dry-type power transformer are used to detect the temperature rise of dry-type power transformer, and according to the temperature rise, it automatically controls the start and stop of cooling fan, gives an over temperature alarm and trips over high temperature to ensure the operation of dry-type power transformer.

Dry-type transformer fan

Dry-type transformer fan refers to the device used for transformer cooling. The stator and rotor iron cores of the motor are made of excellent cold-rolled silicon steel sheets and low noise bearing; the impeller is treated by electrophoresis on the surface of aluminum alloy, and then adjusted by fine dynamic balance; the left and right end plates are stamped with stainless steel plates, and the air inlet plate, air outlet plate and air guide plate are buckled with aluminum alloy profiles; the whole fan has the characteristics of reasonable structure, beautiful appearance, large air volume, low noise, low temperature rise, long service life, stable operation and convenient installation.

Tap changer

Tap changer is applied to tap conversion and connection of coil equipment.

Molded case circuit breaker

Circuit breaker refers to a changer device which can close, carry and break the current under normal circuit conditions and close, carry and break the current under abnormal circuit conditions within a specified period of time.

< 1 2 3 4 5 6 7 >

About Xinte

Nanyang Xinte Electrical Co., Ltd. is a National Hi-tech Enterprise integrating R&D, manufacturing， sales and service of high / low voltage switchgear cabinets, compact / prefabricated substations, dry-type transformers, oil-immersed transformers and accessories, Henan Specialized Special and New Enterprise, a drafting unit of the National Standard for Intelligent On-load Capacity and Voltage Regulating Transformer.

Please do not hesitate to contact us

Tel:86-0377-61521126

Fax:86-377-63652276

Cell Phone: 86-0377-61521126

Address: Nanyang Economic and Technological Development Zone, Nanyang City, Henan Province, China.

WeChat

Business license

This website supports ipv6 SEO Powered by www.300.cn

Message

Products